Parts Check List Base Tilt-up stand Handset Coiled Handset Cord Power Adapter   2 5

3 1   4

Requirements

• IP network
• 24kbps in each direction (8kbps audio signal plus RTP, UDP, and IP packet overhead)
• RJ-45 network cable
• An AC power source or Power-over-Ethernet from an IEEE 802.3af-compliant power injector

Recommendations

• DHCP server
• DNS server
• SIP proxy server
• PSTN gateway

Special Features

VoIP

• SIP (IETF RFC 3261)
• DTMF digits via RTP payload (IETF RFC 2833)

• Ethernet bridge with two RJ-45 jacks
• Hands-free full-duplex speakerphone
• Integrated IEEE 802.3af Power-over-Ethernet capability
• Headset jack
• QoS via VLAN tagging and DSCP

• Two simultaneous call appearances
• Conference calling (with or without server assist—has on-board mixer)
• Redial last 15 numbers
• Do Not Disturb
• Call Hold
• Call Waiting
• Call Forwarding (unconditional, on-busy, and -no-answer)
• Call Transfer (blind, consultative, conferencing)
• Last Call Return (*69)
• Per Call Blocking (*67)
• Temporarily Disable Call Waiting (*70)
• Voicemail access (*99)
• Caller ID and Call Waiting Caller ID
• Configurable dial plans
• Call logs

• Keypad dialing
• 5 one-touch memory keys
• 4 softkeys
• Speed dial from phonebook
• Easy navigation of menu via LCD
• Tracking of missed/outgoing/incoming calls
• 5 distinctive ring tones and 4 call-waiting tones
• Busy and fast-busy tones
• Separate speaker, handset, and ringer volume controls
• Alarms and reminders

• 132 by 64 pixel graphic display
• Message-waiting indicator (MWI)
• Speakerphone and mute indicators

• Configure, check status, and manage phonebook from web browser
• Auto-configuration via HTTP and TFTP across gateways
• Software upgrade via TFTP and FTP

Copyright © ipDialog, Inc. 2002-2006 All rights reserved.